POE6311
PoE6311 ceiling speaker is a network device that can be mounted anywhere with network access, and it supports digital audio stream decoding with a maximum sampling rate of 48kHz and 16-bit resolution.
POE6311 POE IP Network Ceiling Speaker
Features
● Can be mounted to any place accessible to network.
● Support maximum 48kHz sampling rate, 16bit digital audio stream decoding.
● Built-in 2×9W digital amplifier, with low power consumption.
● Can play the background music, emergency paging, alarm signals from the system host.
● Local output volume and local play status can be controlled.
● Provide a complete interface that complies with the IEEE 802.3af / at standard of the Power over Ethernet (PoE) system and a DC15V power supply interface, with two optional power supply modes for switching.
● Strong clip design, easy to install.
PoE6311 ceiling speaker is a network full-digital analog-digital conversion signal processor based on the TCP / IP transmission protocol, which can be mounted to any place accessible to network. The remote audio data steam can be output as audio signal through the equipment with intelligent host control.
| Item | Parameter | |
| Model | PoE6311 | |
| Tone Adjustment | Bass | 0～14 (±2) (60Hz) |
| Treble | +7, -8 (±2) (10KHz) | |
| THD | ≤1% | |
| Effective Output Power | ≧9W | |
| Input Sensitivity | -10±1dB | |
| Frequency Response | 40-18KHz (±3dB) | |
| SNR (A) | ≧70dB | |
| Power | 2×9W | |
| Power Supply | IEEE 802.3 at PoE | |
| Package Size | 255×255×185mm | |
| Machine Size | Φ185×114mm | |
| Gross Weight | 2.5kg | |
| Net Weight | 1.5kg | |
You must be logged in to post a review.
Reviews
There are no reviews yet.